Lighting

• 2 x 0.5 watt super bright red LEDs • 3 modes (1 steady 2 flashing) • Multifit bracket (25-32mm)

- USB rechargeable 3 lumen safety light - 4 modes including 1 solid and 3 flashing settings - Multi-fit rubber strap attachment - Charging cable included

- Flat COB chip rear LED light with 38 individual COB chips - USB rechargeable 300 mAh li-ion polymer battery - 7 modes including a high and low setting and 5 flashing settings - Daytime flash modes enhances safety in any conditions or time of day - Low battery warning and battery capacity indicator (double click button to check) - Mode memory and tool free installation - Mount: seatpost - Lumens: 20

- High brightness 16 chip COB style LED combo set - Perfect for increasing safety on commutes and neighborhood rides - 4 modes including 2 solid setting and 2 flash modes - USB rechargeable - cable included - Lumens: 60

- Single super bright LED safety light - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes - Steady and flash - Lumens: 35

Sunlite's HL-L175/TL-L330 LED Combo is an easy way to be seen and stay safe when riding after dark. The powerful headlight uses an advanced 1-watt LED for brightness beyond its size. Plus, it boasts steady and flash modes, a 35-hour run time on the included AAA batteries, and it attaches to any bar via an easy quick-release mount. Out back, the taillight runs for up to 100 hours and casts a bright light with its 1/2-watt LED. And just like the headlight, it has steady and flashing modes.

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

- USB rechargeable 19 lumen safety light - 6 to 12 hour run tim per charge - 3 modes including 2 solid and 1 flashing mode - Multi-fit rubber strap mounting - Low battery indicator

- 24 lumen LED - Built-in Li-Ion USB rechargeable battery - 1.5 ~ 6 hour run time per charge - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit rubber strap - Water resistant

Headlight • 3 watt LED headlight • 2 modes (1 steady; 1 flashing) • Aluminum casing • Uses 4 AAA batteries (included) Taillight • 2 x 0.5 watt super bright LEDs • 3 modes (1 steady; 2 flashing) • Multi-fit QR seat post mount • Uses 2 AAA batteries (included) • Water resistant

- Rack mount bracket only - Fits TL-L225 taillight

AMPP200 200 lumen USB rechargeable light with excellent side visibility. A versatile rubber strap allows for quick and easy attachment/removal from the handlebar. - Compact rechargeable headlight (200 lm) - Easy to attach and remove, new rubber strap mount - Excellent side visibility - Low battery indicator - USB rechargeable (Micro-USB cable included) - Mode memory function - Three light modes (High / Low / Flashing) - Turns on Flashing mode with double-click of power button Run time: - High mode 200 lumens:approx 1.5hrs - Low mode 40 lumens:approx 13hrs - Flashing mode 200 lumens:approx 30hrs ViZ 100—Compact and versatile, the ViZ100 stands out with Daytime Hyperflash mode in an economical package. - 3 LEDs (100 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (15 lumens):5 hrs - Flashing (10 lumens):70 hrs - Group Ride (35 lumens):11 hrs - Daytime Hyperflash (100 lumens):15 hrs

A simple rear bike light for after dark. The Flare R Metro is a simple USB rechargeable rear bike light that can help cyclists be seen after dark. The versatile design and included bike mount make for easy, tool-free attachment to any bicycle. Remove the included mount to reveal a built-in clip that securely attaches to a rider's belt clip, pocket, or bag. Details: - A versatile USB rechargeable rear bike light designed to help riders stand out after dark. - 20 Lumens help make riders more visible after dark - Triple LED design can be seen from a wide visibility angle - Versatile design can be mounted on a bike, belt, or bag - Two steady modes and one flash mode - Low steady 8L-3 hrs, high steady 20L-1.5hrs, Flash 20L-6 hrs - Includes Flare R Metro, Clip Connect Mount, and Micro USB charging cable - Integrated clip for secure installation on belt or bag, simply remove the mount to access - Clip connect mount with 16-degree offset compensates for seatpost angle

A compact and powerful front light with lasting brightness that makes it easy to see the street, path, or trail and features a dedicated Daytime Running Light mode that can be seen from 2km away, even during daylight hours. Ion Comp R packs the power of lasting light into a sleek, compact design that's at home on any road, mountain, or city bike. Light your way with five modes, including a Daytime Running Light mode that's designed to increase rider visibility during the day and can be seen from 2km away. Product Details - Ion Comp R provides a powerful beam that illuminates the street, path, or trail - A warm, wide 700-lumen beam allows for confident night riding with a great depth of field - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Long-lasting brightness exceeds FL1 industry standards and outlasts the competition - Runtimes: 700LM—1.5hrs, 500LM—3hrs, 300LM—6hrs, 300LM day flash—19hrs, 200LM night flash—9hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - Quick Connect+ offers secure installation with a flexible mount that's compatible with all bars 22.2 to 35mm - Includes Ion Comp R light, Adjustable Quick Connect+ Mount, and micro USB charging cable

Ride safe and be seen at night with the high-performance helmet light. Innovative double-sided helmet-mounted light shines white facing forward and red towards the rear, and features 4 LEDs for excellent visibility. Rubber straps provide easy installation and flexible mounting options on a helmet. - Max Luminous Intensity: 140 Lumens (Front), 10 Lumens (Rear) - Lamp: 2 white high power LED’s (Front), 2 red high power LED’s (Rear) - Battery: 3.7V 680mAh Lithium Ion (integrated) - Control/Burn Time (approximate): 3.3hr (High), 5.5hr (Middle), 33hr (Low), 28hr (Front: Middle / Rear: Blinking) - Charge Time (approximate): 2hr / Micro USB - Input: 5V 500mA - Lamp Housing: Injection molded polymer - Strap Mount: Fits helmet / road bike dropbar - Waterproof: IPX 6 - Low battery indicator - Size: 6.9 x 4.4 x 2cm / 2.7” x 1.7” x 0.8” - Weight: 40g / 1.41oz

A light set with Kindbeam, designed to keep light on the path ahead and out of oncoming riders' eyes. Do the (b)right thing A commuter-focused light set designed to offer a better experience for you and your fellow riders. The Commuter Comp's Kindbeam keeps more light on the path ahead of you while avoiding oncoming riders' eyes, for a bright light that won't blind oncoming riders. Daytime running mode on both front and rear lights adds visibility during the day to make it a great see-and-be-seen light set option for any city or path rider. - See and be-seen light set for everything you need to ride with lights every ride, day or night - Commuter Comp R front Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Flare R City delivers a wide, 35-lumen beam that's ideal for city use - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Commuter Comp modes: high 450LM — 1.5hrs, low 200LM — 6hrs, day flash 300 LM — 12hrs - Flare R City modes: day flash 35LM — 8hrs, night flash 35LM — 16hrs, day steady 20LM — 3hrs, night steady 2LM — 20hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - USB-rechargeable with included micro USB cable

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

The Rojo 100 USB rechargeable bike tail light is designed to keep you safe and visible on every ride, day and night. It’s packed with up to 100 lumens of power so you’ll be sure to be noticed on your daytime rides and commutes whether you’re on the road, bike path or turning the corner downtown. Four precision engineered lighting modes let you select the perfect optimized optical output. - 2 high output Cree XB-D LEDs provide four modes for every kind of ride (Steady, Pulse, Courtesy & Superflash Turbo settings) - See the light in action here! - Tested to FL1 standards - Run times: 5 hrs (Steady – 25 lm), 10 hrs (Pulse - 50-90 lm), 12 hrs (Courtesy - 30-90 lm) and up to 15 hrs (Superflash - Turbo - 100 lm) - Provide 270° of visibility - Designed for when you ride the most…during the daytime. The Rojo 100 is engineered to be highly visible even in bright, sunny conditions - Water resistant – Don’t be worried to ride in the rain, the Rojo 100 is dust & water resistance rated to the IP66 standard - Fast recharging - 650 mAh lithium polymer battery charges in 2.5 hours with micro USB type C cable (included) - Multiple mounting options - Includes rear rack, seat post, seat stay and clip mount flexible mounting options - 48 grams

A versatile USB rechargeable bike light set designed to help riders stand out after dark. Simple bike lights for after-dark The Ion 50 R / Flare R Metro Bike Light Set is a simple USB rechargeable front and rear cycling light set that can help you be seen after dark. The versatile design and included bike mount make for easy, tool-free attachment to any bike. Remove the included mount to reveal a built in clip that securely attaches to a belt clip, pocket, or bag. Product details: - 50 Lumens front and 20 Lumens rear help make riders more visible after dark - Triple LED design can be seen from a wide visibility angle - Versatile design can be mounted on bike, belt, or bag - Each light has two steady modes and one flash mode - Ion 50 R - Low steady 20L-3hrs, high steady 20L-1.5hrs, Flash 50L-6 hrs - Flare R Metro - Low steady 8L-3 hrs, high steady 20L-1.5hrs, Flash 20L-6 hrs - Includes Ion 50 R, Flare R Metro, Clip Connect Mounts, and Micro USB cable - Integrated clip for secure install on belt or bag, simply remove mount to access Features Clip Connect mount The intuitive soft mount attaches quickly and easily to a bike’s handlebars or seatpost. Integrated belt clip Remove the included Clip Connect mount to access the integrated belt clip for easy mounting on belts, bags, and straps. Stand out after dark The Flare R Metro and Ion 50 R are lightweight and simple lights designed to help riders be more visible after dark. USB rechargeable Micro-USB lights that fully charge in 3 hours. By replacing single-use batteries, these lights can help save up to 350,000 disposable batteries.

USB rechargeable, high-performance optical lens front light provides 250 lumens brightness with good value. Rubber strap provides bi-directional tool-free mounting and easy removal on aero / round handlebars or helmet. - Max lumeninous intensity: 250 Lumens - Lamp: 2 white high power LED’s - Battery: 3.7V 850mAh Lithium Ion (integrated) - Control/Burn Time (approximate): 2.5hr (High) / 4.7hr (Middle) / 9.5hr (Low) / 10hr (Blinking) - Charge Time (approximate): 2hr / Micro USB - Input: 5V 500mA - Lamp Housing: Injection molded polymer - Strap Mount: Fits integrated bar/stem combo, aero / round handlebars, & helmet - Waterproof: IPX 6 - Low battery indicator - Size: 6.5 x 4.7 x 2.5cm / 2.6” x 1.9” x 1” - Weight: 45g / 1.59oz

Packed in a sleek profile that complements your road bike, the Hotrod 50™ unleashes a powerful 50 lumens of radiant wide coverage. Its 6 attention grabbing modes keep motorists aware of your presence any time you’re on the road. Its Versatite™ flexible mount lets you attach the Hotrod 50™ tail light to most seat posts and seat stays, including aero styles. Performance - Powerful 50 lumens flashing - Low profile, compact size - USB rechargeable Li-ion battery - Low battery indicator - Water-resistant design - 1:30 ~ 100 hr run time - System Weight: 29g Technology and Safety - 6 modes: High Flash - SteadyPulse® - Zoom - Group - Low Flash - High Steady - SteadyPulse's steady beam helps motorists better gauge their distance from you while the overlapping pulses keep them alert of your presence - Sturdy and flexible Versatite™ mount attaches to most seat posts and seat stays, including aero styles Patent pending. *Features and specs are subject to change without notice.

The AMPP800's compact and durable alloy body features a three-level battery indicator that means there is always time to get home. Modes/Run Times: - Flashing Mode: 200 lumens | 30hrs - High Mode: 800 lumens | 1.5hrs - Middle Mode: 400 lumens | 2hrs - Low Mode: 200 lumens | 4hrs - Daytime HyperFlash Mode: 800/200 lumens | 4hrs - High power rechargeable headlight (800lm) - Powerful, wide beam with OptiCube lens technology - Excellent side visibility - Large-capacity lithium-ion rechargeable battery - Built-in fast recharging circuit: full charge in approx. 3 hours (minimum) - 3-level battery indicator (Blue: Above 50% Yellow: 30-50% Red: Less than 30%) - USB rechargeable (Micro-USB cable included) - Mode memory function - Five light modes (High / Middle / Low / Daytime HyperConstant / Flashing) - Turns on High mode with double-click of power button - FlexTight bracket

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

- 300 lumen, compact handlebar mounted headlight - Rechargeable 2600 mAh battery with included charging cable - 5 modes including 4 steady brightness levels and flashing mode - Integrated silicone rubber strap mount is compatible with bars from 25.4 - 31.8mm - Low battery indicator

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts