Cables

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - SRAM/Shimano - Slick cables are die-extruded for smooth operation - Pre-stretched - Color: Silver - Quantity Included: 1 - Diameter: 1.5 mm

- Stainless steel die-pulled and polished superslick brake cable with electrolysis coating - Electrolysis coating offers an ultra-smooth surface finish that greatly reduces friction for outstanding braking performance - SRAM/Shimano compatible head - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.5mm - Style: Road

- Stainless steel die-pulled and polished slick brake cable for smooth, crisp, and reliable braking - SRAM/Shimano compatible head - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.5mm - Style: Road

SuperSlick compressionless gear cable/housing kits offer unrivaled shifting performance Kits include: - 4mm pre-lubed, Kevlar-lined, compressionless gear housing - 1.1mm stainless steel die-pulled and polished superslick gear cable(s) with electrolysis coating and SRAM/Shimano compatible head(s) for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protector(s) - Cable tip(s)

Replacement grub seals for Jagwire Elite Sealed kits. - Material: Rubber - 10 Pieces

Includes - 1.5mm coated cables (1 x 850mm, 1 x 1750mm) - 5mm Kevlar-reinforced compression-free housing - Ferrules, end caps, frame protectors

DIY Kit Includes: - Housing and Shift Cable - End caps and cable tips - Compatible Shimano/SRAM Specs: - Cable Material: Galvanized - Intended Use: Road/MTB - Cables & Housing Comp: Shimano/SRAM - Housing Length: 2000mm

Lined end caps have an internal sleeve that extends out from the end. This liner protects the inner cable from the opening in the end cap, preventing cable coatings from wearing off and ensuring the lowest possible friction. Lined end caps can also be paired with a sealing liner or a dirt guard to keep dirt and grime out of the housing. Use lined end caps whenever you use Teflon-coated cables to protect the coating.

Includes: - 1.1mm elite cables (2 x 2300mm) - 4mm reinforced linear strand housing - Ferrules, end caps, frame protectors

Shimano, SP41, 4mm Shifter housing, 50m

Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. - Lightweight resin/alloy design

- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm

Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems. - Forged aluminum construction - Mounts to most frame mounting holes - Great for tricky cantilever brake setups - Lightweight design

Hooded end caps offer the greatest level of protection against contamination and are ideal for high contamination environments. - Rubber seal for areas that need the most protection - Alloy body

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

- Flexible linear pull brake guide - Guides cable to brake arm - Bag of 10

- Complete cable kits for internal three-speed hubs

- Use: Brake - Length: 30mm - Diameter: 5mm

- For mountain bike cable-actuated brakes - 1.5mm x 3000mm - Stainless steel

- Galvanized steel inner wire - Standard 5mm S.I.S. housing - Front or Rear - Mountain or road

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

- Basic housing and galvanized inner cable with header card - Derailleur kit includes black casing and a 1.2mm cable - Cables have dual ends with leads to fit any brake or shifter - Cable diameter: 1.2mm - Casing diameter: 5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Dual Cable - Diameter: 1.5mm

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

- MTB or Road - 1.5 x 1855mm - Galvanized

- Galvanized steel inner wire - PTFE lined brake housing - Front or Rear - Mountain or road

- Routes cables underneath the bottom bracket - Will not rust or corrode

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake - Black

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 2300mm liners

Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm

Shimano, SLR brake housing, 40m, Black

Our Box One Inner Shift Cable is the perfect upgrade for your Box Three or Box Four cable. It is also an ideal replacement for your Box One or Box Two cable set-up. When combined with our Box One housing it has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time. FEATURES - Our Best Performing Cable - Slick Coated - Inner Cable 2100mm - (2) 1.8mm Cable End Crimps COMPATIBILITY - Works with 11, 9, 7, 8, 12, and 10 speeds - Weight: 14.6 grams

SuperSlick compressionless brake cable/housing kits offer unrivaled braking performance Kits include: - 5mm pre-lubed, Kevlar-lined, compressionless brake housing - 1.5mm stainless steel die-pulled and polished super-slick brake cables with electrolysis coating and SRAM/Shimano compatible heads for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protectors - Cable tips

Origin-8 Plastic Cable Guides provide a quick, easy, clean routing system for your cables. Great for disc brake lines or for rear brake cable housing guides, they mount to any frame type. The plastic guide will not damage the frame and no need to worry about corrosion. - Zip ties to frame - 2 per package - Black

SuperSlick compressionless brake cable/housing kits offer unrivaled braking performance Kits include: - 5mm pre-lubed, Kevlar-lined, compressionless brake housing - 1.5mm stainless steel die-pulled and polished superslick brake cables with electrolysis coating and SRAM/Shimano compatible heads for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protectors - Cable tips

SuperSlick compressionless gear cable/housing kits offer unrivaled shifting performance Kits include: - 4mm pre-lubed, Kevlar-lined, compressionless gear housing - 1.1mm stainless steel die-pulled and polished superslick gear cable(s) with electrolysis coating and SRAM/Shimano compatible head(s) for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protector(s) - Cable tip(s)

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

Cables are coated with a durable low-friction polymer. - Dupont Tefzel coating is more durable than previous coated cables - Length: 2350mm - Diameter: 1.6mm - Double Ended: No

- Front or rear brake - MTB specific - 1.5mm stainless cable

- Stainless steel die-pulled and polished super-slick brake cable with electrolysis coating - Electrolysis coating offers an ultra-smooth surface finish that greatly reduces friction for outstanding braking performance - SRAM/Shimano compatible head - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.5mm - Style: MTB

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet

- 5mm pre-lubed, Kevlar-lined, compressionless brake cable housing offers smooth, crisp, and reliable braking - 30-meter bulk box for shop use