Car Racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Accent 4-dr Sedan with Normal Roof 2018 - 2019

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 108cm / 43 in

Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

Don't let the sleek lines fool you. SkyLine FX is a cutting-edge roof rack with integrated crossbars and towers that has no bar overhang and is designed to support whatever you're carrying. It gives your vehicle a clean, modern aesthetic with a seamless attachment to all of our vehicle-specific Landing Pads. PRODUCT DETAILS - Integrated tower and crossbars, for a clean visual connection to the vehicle, with no crossbar overhang - Secure, easy-to-use tower specifically designed for Vehicles with Fixed Points or Tracks - Includes aerodynamic, T-slot JetStream Black crossbars - SmartFill push-down infill for easy t-slot mount attachment - Sleek tower cover styling with matte finish, tone-on-tone black logo - Easily locks to you vehicle with our SKS system (sold separately) - Multiple bar lengths available for precision sizing on various vehicle roof widths - Uses Yakima's proven Landing Pads for attachment to vehicles with fixed points or tracks - BarBed has 12° of pitch adjustment to optimize tower position and level bars PRODUCT SPECS - Weight: 5.00 lbs. - Dimensions: L 33.50 in x W 5.00 in x H 3.50 in

Got a downhill bike - Fully padded cradle accommodates dual-crown suspension forks - For use with HangTight 4 and 6 only - Accommodates 1 bike up to 37.5 lbs. - Fits most modern flat and drop-crown style dual-crown suspension forks

Ultimate bike protection and loading/unloading ease with the MHS Duo Bike Tray. Integrates seamlessly with any MHS Modular Base. - Saris MHS Duo platform bike rack connects quickly and easily to any MHS Base - DUO Dual-arm design provides the ultimate bike carrying versatility, compatible with the widest wide range of bikes, including e-bikes, fat bikes, fender bikes and step through - Zero frame contact bike protection and super stable bike transport - Dual-arm design provides superior bike protection and limits potential of bike to bike contact - Carries 1 bike up to 60 lbs - Tool-free, adjustable wheel block accommodates wheel sizes from 20 to 29 inches and tires as wide as 5 inches. - Accommodates wheelbases up to 53" - Fully locking with integrated steel cable that stores conveniently in tray - Fast, easy, and secure mounting to MHS Hitch Base (Base sold separately)

Ultimate bike protection and loading/unloading ease with the MHS Duo Add-On Bike Tray. Integrates seamlessly with any MHS Modular Base. - Saris MHS Duo Add-On platform bike rack connects quickly and easily to any MHS Base - DUO Dual-arm design provides the ultimate bike carrying versatility, compatible with the widest wide range of bikes, including e-bikes, fat bikes, fender bikes and step through - Zero frame contact bike protection and super stable bike transport - Dual-arm design provides superior bike protection and limits potential of bike to bike contact - Carries 1 bike up to 35 lbs - Tool-free, adjustable wheel block accommodates wheel sizes from 20 to 29 inches and tires as wide as 5 inches. - Accommodates wheel bases up to 53" - Fully locking with integrated steel cable that stores conveniently in tray - Fast, easy, and secure mounting to MHS Hitch Base (Base sold separately)

We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

Hollywood's Traveler racks get you traveling with all your bikes quickly and economically. The Traveler 3 carries 3 bikes and includes Hollywood's separators and anti-sway stabilizers that make mounting the bikes easy and protects them in transit. This versatile hitch-mount rack tilts down for easy rear access and the arms fold out of the way when the rack is not in use. Plus, Hollywood's No-Wobble Hitch system holds the whole system steady even on bumpy roads. And, with the universal heavy-duty metal hitch insert, the Traveler 3 fits 1 1/4- and 2-inch hitches so you can use your rack on different vehicles. - Not to be used on any trailer, fifth wheel or towed vehicle - Weight: 27 lbs - Max weight capacity: 35 lbs per bike

Secure and easy-to-use roof-mounted front wheel holder keeps muddy and bulky wheel out of the trunk. - Fits quick-release wheels out of the box and thru-axle wheels with adapter accessory - Fits all wheels from 20" up to 29" and tire size up to 3" - Fits 9mm quick-release bikes - Fits 12-20mm thru-axle bikes with adapter accessory (adapter sold as an accessory) - Holder arm can be separated from the base for convenient loading of the front wheel off the car - Holder arm with the wheel installed easily docks to the base - Locks the front wheel to the holder and the holder to the roof rack (locks included) - Ability to fold flat when not in use - Fits most roof racks up to 90mm by around-the-bar solution including Thule SquareBar roof rack with included adapter

Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).

Sunlite's versatile 2-Bike Trunk Rack carries two bikes and fits almost any vehicle. Positive locking straps attach the rack to your car and provide fast, simple installation. Vinyl-coated hooks and arms protect your bike and your car's finish. And when not in use, this rack folds flat for storage.

- Great for storage or transportation - Alloy construction - Can be mounted vertically or horizontally

An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack. - Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome). - A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F). - For use with 2" receivers only. - Hitch pin and hardware sold separately.

The Original Pickup Truck Bike Hauler Pad For Late-Model Trucks With Rear-View Cameras Trailhead commute or gravity-shuttle duty, no bike rack compares to the convenience of a Dakine Pickup Pad. The DLX pad fits modern tailgates with backup cameras. The Large model works best on full-size tailgate designs and has tie-downs for up to seven bikes. The Small fits midsize truck tailgates and has tie-downs for up to five bikes. A built-in security grommet lets you lock it to your truck. We've stiffened the ends of the webbing straps for easy installation under the tailgate and added cam-action buckles for quick removal. - 2 Year Limited Warranty - Padded tailgate protection - Large access flap for tailgate handles and rear-view cameras - Works best on new tailgate designs - Individual bike anchor straps (Large: 7; Small: 5) - Four web cinch straps - Cable-lock compatible - Reflective logo

He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

With years of experience and feedback, Kuat overhauled every feature and streamlined the look while maintaining the spirit of its predecessor. A re-designed pivot system with foot assist will endure a lifetime of abuse. Adjustable cradles allow for fast bike fit adjustments. Individual bike cable locks are longer, more durable, and easier to use. Holds bikes with up to 4.8-inch tires ensure a true fit for any bike in your stable. Updated ratchet arm creates an intuitive release and a more stable tow. The ground-up re-design of the Trail Doc work stand delivers a pro level feel. These are only the highlights, resulting from 3 years of extensive development, making the NV 2.0 the most advanced hitch rack on the planet. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks - Trail Doc included - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium gloss metallic powder with water transferred logos - Hitch lock included - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch, and tires as large as 4.8-inch with use of the Phat Bike Kit - Fits 20-inch to 29-inch tires - Wheel adapter needed for 20-24-inch tires - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV 2.0 Add-On

The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.

The Piston® Pro features some of the same great features as The Piston® Pro X minus a few bells and whistles. Features like all metal construction, OneTap™ hydro-pneumatic tire arms that make no contact on the bike frame, and tool-free wheel chock slides. But don't worry, this thing still sings. - All metal construction - OneTap™ hydro-pneumatic tire arms - No frame contact - Patented FastFit™ tool-free wheel chock system - Patented PedalPivot™ - Patented Flatlock™ hitch cam - No Worries Limited Warranty - 2 – Bike capacity (Add-ons Available) - 67 lbs. per tray on 2” 2-bike, 60lbs. for 1.25” version - 42 lbs. per tray on chassis mounted RV hitch (see limited warranty for details) - 53” Max wheelbase - 5” Max tire width

We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

Expand your vehicle’s carry capacity (and your circle of friends) up to four bikes with the NV 2.0 Add-Ons. It's conceived for road trips, family group rides and expeditions in the backcountry—we took the best platform rack on the market and increased it. Integrated Cable Locks - Seamlessly integrated locks—long enough to fit any frame—make sure your bike stays off Craigslist while you enjoy that post-ride beer stop. And when you’re ready to roll again, they stow right back into the rack. Adjustable Tire Cradles - Bikes not wanting to share space nicely? Easily dial in the fit with adjustable tire scoops. You get three positions to choose from, so handlebar and seat post clearance is never an issue. - Intuitive Front Tire Ratchet - Trail-Doc Compatible - Premium Protective Gloss or Matte Powdercoat

Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.

Sunlite's versatile 4-Bike Trunk Rack carries four bikes and fits almost any vehicle. Positive locking straps attach the rack to your car and provide fast, simple installation. Vinyl-coated hooks and arms protect your bike and your car's finish. And when not in use, this rack folds flat for storage.

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Hitch Base fits 2" receivers - Base accommodates 2 bike trays + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 3 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle

Set of heavy duty wheel holders for Fat tire E-bikes and regular fat bikes for tires up to 5" wide