Write a Review

- High-quality fat bike rim strips - Super durable PVC material

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

A sleeved AM rim, supporting modern tires with its 30mm inner width. Just wide enough, just light enough. With a 30mm internal rim width, the M 502 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest of terrains. DT Swiss's benchmark rim material is combined with an economic sleeve-junction to offer the best ratio between low weight, big width, and a low price.

Aluminum rear hub for bicycle - 18P DBCL 24 holes, straightpull, black. Aluminum Campagnolo freehub body, black. - Dimension: 12x142mm

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Litehouse Rim - Super-thick angled sidewalls to minimize the risk of damage when you hang up - Wider cross-section to compliment modern tire widths for an optimized assembly

Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only

These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.

When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Upgrade or refresh your bike. - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

- An ultra-wide, high performance alloy rim, weight optimized for Enduro, Trail and All Mountain use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 35mm and outer width of 39.5mm provides ultra-wide support for Plus-Size and high volume tires - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable - MGR Dynamal Alloy

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - One-piece design - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6 mm hex wrench required for installation

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

The Boost 6-Bolt front is specifically for "Boost" disc spacing forks with 110x15mm "Boost" axles. Using the larger diameter hubshell bearing the Boost 6-Bolt is designed to tackle rough terrain and aggressive riding such as downhill and enduro. In an evolving landscape of axle specifications, we are confident that the "Boost" disc location is here to stay. Chris King Boost 6-Bolt front hubs are designed as precision mountain tools. We use one-piece axles to provide a stiff hub with rail accurate steering, transferring every minute adjustment you make to the trail. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra low drag. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Steel Bearings - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Wide flange placement - Fits 110x15mm Boost axles - Legendary made-in-house LD bearings - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our Universal Hub Service Tool - Responsibly lightweight - Ceramic bearing upgrade available - Available in 28, and 32 hole spoke count

- 45mm deep aerodynamic carbon disc brake wheelset - Wind Tunnel Optimized rim profile, aerodynamic aluminum hubs, and USB ceramic bearings for optimal performance in all conditions - 2-Way Fit tubeless-ready rims with 19mm internal width, optimized for use with wider tires - G3 spoke lacing front and rear for maximum power transfer and braking performance - Black-on-black Dark Label graphics - Only 1520g per pair

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Dependable Independence – Reliability, versatility, and simplicity are united in a hub. Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36-tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. PRODUCT DETAILS: - A DEPENDABLE HUB The freehub Ratchet System makes the 350 the dependable partner for any ride - NO TOOL CONCEPT Plug-in hub construction allows for quick and tool-free maintenance - NEW ENDCAPS The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly - VARIETY The 350 hub is available for all common axle standards and for the various drivetrain systems. TECHNOLOGY: We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies. LEGENDARY RELIABILITY: The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability. The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.

Replacement spoke kits for DT Swiss PR1400 wheels. - Includes 6 spokes and 6 nipples

This welded, 30mm-wide E-MTB rim is the ideal all-rounder. When you head into the unknown, the HX 531 is the perfect choice with a 30mm internal width to support meaty tires. With an ideal position in the middle of the strength to weight to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion

Strong and lightweight welded AM rim in 30mm inner width for modern tires. Riders who like the idea of giving their tires some extra volume and support will find the ideal partner with the XM 481. Its full 30mm of inner width combined with a minimal hook and perfect tubeless compatibility, make it ready to tackle all demanding trails, both up and down the mountain.

Upgrade or refresh your bike. - Original Equipment replacement Bontrager AT-550 700c wheels - Bontrager AT-550 single wall, non-eyeletted rims - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 20-inch

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Conical X12 washer, compatible with Syntace X-12 system - Removable, plug-in lever design is streamlined and protects your RWS lever - Thread Pitch: 12 x 1.0mm

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher

Centerlock hubs on tubeless-ready rims. Includes convertible endcaps for Quick-release and Thru-Axle

- Specifically designed for XC and all-mountain use - Shorter and thicker sidewalls for incredible durability even when paired with low pressure, tubeless tires - Bead hook maximizes 30mm internal width for optimum tire performance

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

Sta-Tru Double Wall Rear Wheels. - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher